Product Series
LED crane warning projectors mark hook paths, suspended load danger zones and travelling crane lanes for factory and warehouse safety. Browse the crane warning models below, with height, voltage and control guidance after the product list.
Use these ranges for early selection. The final model should be checked by ambient light, floor color, projected image size, installation angle and whether the light moves with the trolley.
| Crane height | Recommended starting power | Typical image size | Notes |
|---|---|---|---|
| 7 m crane warning area | 200W | 80-120 cm | Typical workshop crane warning sign or hook path warning. |
| 10 m crane warning area | 300W | 120-180 cm | Common high workshop or warehouse crane safety zone. |
| 12 m crane warning area | 350W to 500W | 150-220 cm | Higher installation, larger warning area or stronger ambient light. |
External infrared, radar or photoelectric sensors can trigger suitable projector systems. Relay, IO, remote control, DMX512, rotating pattern and multi-image switching are available for project-based configurations.
For high-temperature workshops above ordinary industrial conditions, use a dedicated high-temperature model with stronger cooling. Do not assume every crane projector is suitable for 80C+ environments without model confirmation.
Use it when the hook path, suspended load area or crane travel lane needs a visible warning zone that floor paint, tape or fixed signs cannot provide.
Yes. The warning can be a line, arrow, danger zone, STOP sign, crane hook icon, company symbol or site-specific safety text.
Yes, suitable systems can use external sensors, relays, IO signals, remote control or DMX control depending on the required movement and warning logic.
Please send crane height, mounting position, projection distance, required warning size, voltage, site photos or video, whether the light moves with the trolley, ambient temperature, dust/water exposure, quantity and target country.
