Crosswalk Projector at a Night Road Crossing in Fengjie, Chongqing

In August 2026, a crosswalk projector was running at a road crossing in Fengjie, Chongqing. After dark it cast yellow and white zebra bars onto the asphalt, together with short safety messages that told people when they could cross and when they should wait. This case shows how that projection looked on a live urban street and records what the commissioning visit had to deal with—without treating projected light as a substitute for site traffic rules.

The crossing at night in Fengjie

The junction sits on a commercial street. Shop signs, streetlamps, a nearby tower, and the headlights of cars and motorcycles all compete for attention after dark. Painted markings on the carriageway are easy to lose in that mix. A person stepping off the curb, or a rider rolling toward the crossing, has only a short window to see the same cue.

The photographs from the site show the response on the road surface itself: a wide band of alternating yellow and white bars laid across the lane, bright enough to read against the asphalt and the surrounding street lighting. Bollards stand at the near edge of the sidewalk. Traffic-signal poles are visible at the junction. This is an outdoor public-road crossing, not a warehouse aisle.

Yellow-and-white crosswalk projector pattern on a night street in Fengjie, Chongqing, with a circular mark at the near curb reading Safety First, 安全第一, and DIBEI
The crossing at night, Fengjie, Chongqing, August 2026. A crosswalk projector puts yellow and white zebra bars on the asphalt. The circular mark at the near curb shows the visible wording “Safety First / 安全第一 / DIBEI.”

What the crosswalk projector put on the road

The main pattern is a zebra crossing: broad yellow and white bars that span the carriageway. On some of those bars, Chinese characters are also visible, including 法 and 过.

At the sidewalk edge, between two bollards, a circular yellow mark is projected onto the pavement. The wording visible on that mark is shown in the photograph above.

The same crossing also showed two pedestrian messages in different colours, recorded in still photographs and in video:

  • A green circular sign: 行人安全通行 (“pedestrian safe to cross”).
  • A red circular sign: 行人禁行 (“no crossing”).
Green circular pedestrian-safe-to-cross projection reading 行人安全通行 beside yellow-and-white zebra bars at the Fengjie crossing
Green circular message “行人安全通行” (pedestrian safe to cross) at the edge of the projected zebra bars.
Red circular no-crossing projection reading 行人禁行 at the Fengjie road crossing, with the characters 法 and 过 on the zebra bars
Red circular message “行人禁行” (no crossing). The characters 法 and 过 are also visible on the zebra bars.

The green “行人安全通行” (pedestrian safe to cross) and red “行人禁行” (no crossing) messages switch with the traffic signal. For how a zebra crossing projector can work with traffic-light control, see Smart Zebra Crossing Projector Improves Pedestrian Safety with Traffic Light Integration.

On-site video from the Fengjie crossing: the projected pedestrian message switches between “行人禁行” (no crossing) and “行人安全通行” (pedestrian safe to cross) with the traffic signal.
Yellow-and-white projected zebra crossing on a night commercial street in Fengjie, Chongqing, seen from the sidewalk
The projected crossing on the commercial street after dark, with traffic-signal hardware visible above the lane.

Commissioning notes from the July–August 2026 visit

A field team arrived at the Fengjie site in the late afternoon of 31 July 2026 and started night work with an aerial lift after 19:30. The job was to replace projection patterns and correct the alignment of the fixtures already installed at the crossing.

On the first night the team replaced patterns on six fixtures: four single-pattern units and two four-pattern units. Pattern alignment and one fixture swap were handled on site; a pan-tilt base is recommended for sideways adjustment.

Rain stopped outdoor work on 3 and 4 August. After the weather cleared on 5 August, the fixtures were installed in position and debugging was completed. The team returned to Shenzhen on 6 August.

These notes are useful for the next outdoor road job: plan for night access and an aerial lift, leave time for pattern alignment, and do not assume a rain-free window on an open street.

What to check before a similar road installation

A single night-time photograph is not a specification. Before repeating this kind of setup on another road, the following should be confirmed on site:

  • The job is an outdoor night crossing. Ambient light from shops, streetlamps, and headlights is part of the scene. For how this differs from a warehouse path, see the crosswalk projector selection guide for outdoor roads and warehouse paths.
  • The pattern must be readable on asphalt. Zebra bars need a clean edge and enough contrast. If wording is part of the design, each character has to stay sharp at the actual throw distance—not only in a close-up.
  • If more than one message is required, agree in advance which signs appear and how they will change with the traffic signal, as they do at this crossing.
  • Mounting and adjustment. Pole pitch, base condition, and left-right travel affect whether the bars land square on the lane. A pan-tilt or equivalent adjustment is worth planning if the image must be shifted sideways after the pole is fixed.
  • Commissioning time. Night work, weather, and a spare fixture should be in the plan.
  • Local rules. A projected marking supports visibility. It does not replace traffic law, signal hardware, or the site owner’s duty of care.

Another outdoor night example, with a different street and a different on-road message, is the crosswalk projector case at a road crossing in Turpan. For an indoor contrast—forklifts and pedestrians sharing a warehouse path—see how a zebra crossing projector can improve forklift and pedestrian safety in warehouses.

If you have a road or plant crossing that needs a clearer night-time cue, contact us with site photos, ambient lighting, and the message you need on the ground.

Share your love

Leave a Reply

Your email address will not be published. Required fields are marked *